Sbm-Gem-X2C(+) 1/10-Gb Ethernet Switch Module; Figure 5-2. Sbm-Gem-X2C(+) 1/10-Gigabit Ethernet Switch Module Ports & Indicators; Table 5-4. Sbm-Gem-X2C(+) 1/10-Gigabit Ethernet Switch Module Interface - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
5-2
SBM-GEM-X2C(+) 1/10-Gb Ethernet Switch Module
The SBM-GEM-X2C(+) 1/10-Gigabit Ethernet switch module is a layer 2/3 Ethernet
switch. It includes three 10-Gb/s uplink ports (two CX4 and one SPF+), two 1-Gb/s
uplink RJ45 uplink ports and fourteen (X2C) or twenty (X2C+) 1-Gb/s downlink ports for
the SuperBlade's LAN interfaces. The Ethernet switch module has two internal Ethernet
paths to the CMM(s). The switch is used to provide a connection between the Ethernet
controller integrated on the mainboard and an external Ethernet device. This is a
hot-pluggable module. See
Figure 5-2. SBM-GEM-X2C(+) 1/10-Gigabit Ethernet Switch Module Ports & Indicators
7
6
Table 5-4. SBM-GEM-X2C(+) 1/10-Gigabit Ethernet Switch Module Interface
Item
Description
1
RS-232 (COM) Serial Port
2
Module Fault LED
3
"Initiation OK" LED
4
Stack ID LEDs (4)
5
10-Gbps Uplink Port Status LEDs (3)
6
1-Gbps RJ45 Uplink Port Status LEDs (Link/Activity and Speed)
7
1-Gbps RJ45 Uplink Ports (2)
8
CX4 10-Gbps Uplink Ports (2)
9
SFP+ 10-Gbps Uplink Port
10
Module Release Handle
Figure
5-2,
Table 5-4
5
8
5-3
Chapter 5: Ethernet Modules
and
Table 5-5
4
3
9
for switch details.
2
1
10
Advertisement
Table of Contents
