Table of Contents
Advertisement
4.8.1 Interface Settings
Port Channel Interface Basic Settings page allows to configure port channels.
Port Channel ID - Specifies the identifier of the port channel interface. The valid values are
between 1 to 65535.
Port List – Displays the port list.
No of ports – Displays the number of ports configured in LA.
Admin State – Displays administratively make port channel Up or Down.
Oper State – Displays operational status for port, Up or Down.
MLAG Status - This is used to enable or disable MLAG status for port channel. This filed is
available in MLAG supported switch model.
Strom Control :
Below fields are under Storm Control:
DLF level pps - User can specify Destination lookup failure(DLF) limit in packets per
•
second..
Broadcast level pps - User can specify Broadcast limit in packets per second.
•
Multicast level pps - User can specify Multicast limit in packets per second.
•
MTU – MTU value for this port channel. The allowed values from 1500 to 9216. The defaul value
is 1500.
Switch port mode – Specifies the switch port mode, Access or Trunk or Hybrid for port channel.
Load balancing – User can either choose to Source MAC Address Based or Destination MAC
Address Based or Source and Destination MAC Address Based or Source IP Address Based or
Destination IP Address Based or Source and Destination IP Address Based.
Description – Specifies interface description string for this port channel.
Release: 1.0
MBM-GEM-004 Switch Web User Guide
102 / 164
Advertisement
Table of Contents
