Security Commands
show ip-subnet-lookup fdb
show ip-subnet-lookup fdb {<ipaddress> | <ipaddress><netmask>}
Description
Displays the contents of the IP FDB subnet forwarding table. If no option is specified, all IP FDB subnet
entries are displayed.
Syntax Description
ipaddress
Specifies an IP subnet address.
netmask
Specifies a subnet mask.
Default
The default is to show all IP subnet FDB entries.
Usage Guidelines
None
Example
The following command displays the IP subnet forwarding entries:
show ip-subnet-lookup
This command generates output similar to the following:
Dest IP Addr
TblIdx MacIdx
--------------- ------ ------
20.2.0.0
11402.0 CCFA.0 00000
20.3.0.0
11403.0 CCFA.0 00000
20.4.0.0
11404.0 CCFA.0 00000
....
20.10.128.0
1940A.0 CCFA.0 00000
Total number of entries = 61
IPFDB SUBNET Lookup Maskbits: [18]
History
This command was first available in ExtremeWare 7.3.0.
This command was added to the "e" series platforms in ExtremeWare 7.5.
Platform Availability
This command is available on all platforms.
1040
Flag Flow
MAC Address
---- ---- ----------------- ---- ----
0000 00:00:00:00:00:04 4091 4:3
0000 00:00:00:00:00:04 4091 4:3
0000 00:00:00:00:00:04 4091 4:3
0000 00:00:00:00:00:04 4091 4:3
VLAN Port
ExtremeWare 7.5 Command Reference Guide