Configure Slb Gogo-Mode Tcp-Port-Check Timer - Extreme Networks ExtremeWare Command Reference Manual

SLB Commands—"i" Series Switches Only

configure slb gogo-mode tcp-port-check timer

configure slb gogo-mode <port number> tcp-port-check timer [ftp | http |
https | imap4 | ldap | nntp | pop3 | smtp | socks | telnet | tftp | web |
www | <TCP port number>] frequency <seconds> timeout <seconds>
Description
Overrides the global frequency and timeout values for the TCP port check.
Syntax Description
port number Specifies the GoGo mode master port.
ftp Specifies the FTP TCP port check.
http Specifies the HTTP TCP port check.
https Specifies the HTTPS TCP port check.
imap4 Specifies the IMAP4 TCP port check.
ldap Specifies the LDAP TCP port check.
nntp Specifies the NNTP TCP port check.
pop3 Specifies the POP3 TCP port check.
smtp Specifies the SMTP TCP port check.
socks Specifies the SOCKS TCP port check.
telnet Specifies the telnet TCP port check.
tftp Specifies the TFTP TCP port check.
web Specifies the Web TCP port check.
www Specifies the www TCP port check.
TCP port number Specifies a TCP port for the TCP port check.
frequency Specifies the frequency of the TCP port check. The range is 5 to 120 seconds.
timeout Specifies the timeout of the TCP port check. The range is 5 to 300 seconds.
Default
The default frequency is 30 seconds.
The default timeout is 90 seconds.
Usage Guidelines
This command affects only the specified GoGo mode group.
To set the global TCP port check frequency and timeout, use the following command:
configure slb global tcp-port-check
The frequency must be less than the timeout.
548 ExtremeWare 7.7 Command Reference Guide