Configure Slb Vip Client-Persistence-Timeout - Extreme Networks ExtremeWare Command Reference Manual
Version 7.7
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2546 pages) ,
- Command reference manual (2254 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
SLB Commands—"i" Series Switches Only
configure slb vip client-persistence-timeout
configure slb vip [<vip name> | all] client-persistence-timeout <seconds>
Description
Configures the client persistence timeout value.
Syntax Description
vip name
all
client-persistence-timeout
Default
The default
client-persistence-timeout
Usage Guidelines
Extreme Networks recommends that you specify a short client persistence timeout, because longer
timeout values consume more memory.
Example
The following command configures the virtual server "ftp" with a client persistence timeout of 3000
seconds:
configure slb vip ftp client-persistence-timeout 3000
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
566
Specifies a virtual server.
Specifies all virtual servers.
Specifies the persistence timeout. The range is 1 to 999,999,999.
is 3600.
ExtremeWare 7.7 Command Reference Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the ExtremeWare and is the answer not in the manual?
Questions and answers