SLB Commands—"i" Series Switches Only
configure flow-redirect service-check ftp
configure flow-redirect <flow redirect> service-check ftp user <user name>
<password>
Description
Configures the flow redirection FTP check.
Syntax Description
flow redirect
Specifies a flow redirection policy.
user name
Specifies the user name for logging in to the FTP service.
password
Specifies the password for logging in to the FTP service.
Default
N/A
Usage Guidelines
This command automatically enables FTP check. The FTP check logs in to each next hop specified in the
flow redirection policy with the user name and password specified.
For ExtremeWare 6.2.0 and prior, the frequency of the FTP check is 60 seconds, the timeout of the FTP
check is 180 seconds, and you cannot configure these times.
For ExtremeWare 6.2.1 and later, configure the frequency and timeout using the following command:
configure flow-redirect timer service-check
Example
The following command configures (and enables) FTP check for the flow redirection policy named
"ftp_flow" and logs in with the user name "test" and password "extreme":
configure flow-redirect ftp_flow service-check ftp user test extreme
History
This command was first available in ExtremeWare 6.1.5.
Platform Availability
This command is available on all "i" series platforms.
498
ExtremeWare 7.7 Command Reference Guide
Need help?
Do you have a question about the ExtremeWare and is the answer not in the manual?