Configure Slb Gogo-Mode Tcp-Port-Check Delete - Extreme Networks ExtremeWare Command Reference Manual

SLB Commands—"i" Series Switches Only

configure slb gogo-mode tcp-port-check delete

configure slb gogo-mode <port number> tcp-port-check delete [ftp | http |
https | imap4 | ldap | nntp | pop3 | smtp | socks | telnet | tftp | web |
www | <TCP port number>]
Description
Deletes the specified layer 4 port.
Syntax Description
port number Specifies the GoGo mode master port.
ftp Specifies the FTP TCP port check.
http Specifies the HTTP TCP port check.
https Specifies the HTTPS TCP port check.
imap4 Specifies the IMAP4 TCP port check.
ldap Specifies the LDAP TCP port check.
nntp Specifies the NNTP TCP port check.
pop3 Specifies the POP3 TCP port check.
smtp Specifies the SMTP TCP port check.
socks Specifies the SOCKS TCP port check.
telnet Specifies the telnet TCP port check.
tftp Specifies the TFTP TCP port check.
web Specifies the Web TCP port check.
www Specifies the www TCP port check.
TCP port number Specifies a TCP port for the TCP port check.
Default
N/A
Usage Guidelines
This command deletes the port from the specified TCP port check in the specified GoGo mode group.
You can only delete a single port with each command; to delete multiple ports, you must enter multiple
commands.
Example
The following command deletes FTP from the GoGo mode TCP port check for the group with port 29 as
the master port:
configure slb gogo-mode 29 tcp-port-check delete ftp
History
This command was first available in ExtremeWare 6.1.5.
546 ExtremeWare 7.7 Command Reference Guide