Configure Slb Vip Service-Check Telnet - Extreme Networks ExtremeWare Command Reference Manual

configure slb vip service-check telnet

configure slb vip <vip name> service-check telnet {user <user name>
password {encrypted} <password>}
Description
Configures layer 7 telnet service checking for a specific virtual server.
Syntax Description
vip name
user
password
encrypted
Default
N/A
Usage Guidelines
This command automatically enables service checking.
If you do not enter a password, you are prompted for the password twice. Extreme Networks
recommends that you use a password.
The telnet service check provides a more thorough check than ping check, because the telnet service
check logs in to the service.
The
encrypted
upload configuration
download configuration
To configure the frequency and timeout of service checks, use the following command:
configure slb global service-check
To configure the global parameters, use the following command:
configure slb global telnet
Example
The following command configures the service check to login using the user name service and the
password check on the virtual server named telnetvip:
configure slb vip telnetvip service-check telnet user service password check
History
This command was first available in ExtremeWare 6.1.
ExtremeWare 7.7 Command Reference Guide
Specifies a virtual server.
Specifies the user name that is checked.
Specifies the password for the user name.
Encrypts the password stored in the configuration file.
option is used by the switch when it generates an ASCII configuration file (using the
command), and parses a switch-generated configuration file (using the
command). Do not select the
configure slb vip service-check telnet
option.
encrypted
577