Configure Slb Global Persistence-Method - Extreme Networks ExtremeWare Command Reference Manual

configure slb global persistence-method

configure slb global persistence-method [per-packet | per-session]
Description
Configures the behavior of the persistence timer.
Syntax Description
per-packet
per-session
Default
The default method is
Usage Guidelines
Using per-packet persistence requires more CPU processing.
To set the persistence timer, use the following command:
configure slb vip <vip name> client-persistence-timeout
Example
The following command sets the global persistence method to expire at the end of the session:
configure slb global persistence-method per-session
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare 7.7 Command Reference Guide
Resets the persistence timer at the receipt of each packet.
Resets the persistence timer at the beginning of the session. When the timer expires,
persistence for the session ends.
.
per-session
configure slb global persistence-method
523