Show Udp-Profile - Extreme Networks ExtremeWare Command Reference Manual

IP Unicast Commands

show udp-profile

show udp-profile {<profile_name>}
Description
Displays the UDP profile information.
Syntax Description
profile_name Specifies a UDP profile name.
Default
N/A
Usage Guidelines
Displays the following information:
• Profile names
• Input rules of UDP port, destination IP address, or VLAN
• Source VLANs to which the profile is applied.
Example
The following command displays the UDP profile information for the UPD profile named backbone:
show udp-profile backbone
History
This command was first available in ExtremeWare 4.0.
This command was added to the "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1766 ExtremeWare 7.7 Command Reference Guide