Configure Isis Lsp Holddown Interval - Extreme Networks ExtremeWare Command Reference Manual
Version 7.7
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2546 pages) ,
- Command reference manual (2254 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
IGP Commands
configure isis lsp holddown interval
configure isis lsp-holddown-interval <seconds>
Description
Configures the LSP hold down interval.
Syntax Description
seconds
Specifies the LSP hold down interval in seconds.
Default
10 seconds.
Usage Guidelines
The LSP hold down interval range is from 3 to 120 seconds.
Example
The following command configures the LSP hold down interval:
configure isis lsp-holddown-interval 20
History
This command was first available in ExtremeWare 7.0.0.
Platform Availability
This command is available on the "i" series platforms.
1788
ExtremeWare 7.7 Command Reference Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the ExtremeWare and is the answer not in the manual?