Ip Ssh Pubkey-Auth - Dell PowerConnect 8024 Cli Reference Manual

Default Configuration
The default value is 22.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example specifies the port to be used by the SSH server as 8080.
console(config)#ip ssh port 8080

ip ssh pubkey-auth

Use the ip ssh pubkey-auth command in Global Configuration mode to enable public key
authentication for incoming SSH sessions. To disable this function, use the no form of this
command.
Syntax
ip ssh pubkey-auth
no ip ssh pubkey-auth
Default Configuration
The function is disabled.
Command Mode
Global Configuration mode
User Guidelines
AAA authentication is independent from this configuration.
Example
The following example enables public key authentication for incoming SSH sessions.
console(config)#ip ssh pubkey-auth
1046
SSH Commands