Arp Settings Cli Commands - Dell PowerConnect 5324 User Manual

Configuring ARP Using the CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
ARP Settings page.
Table 6-32. ARP Settings CLI Commands
CLI Command
arp ip_addr hw_addr
{ethernet interface-number |
vlan vlan-id | port-channel
number}
arp timeout seconds
clear arp-cache
show arp
no arp
The following is an example of the CLI commands:
Console(config)# arp 198.133.219.232 00-00-0c-40-0f-bc
Console (config)# exit
Console# arp timeout 12000
Console# show arp
ARP timeout: 80000 Seconds
Interface
---------
g1
g2
138
Configuring System Information
Description
Adds a permanent entry in the ARP cache.
Configures how long an entry remains in the ARP
cache.
Deletes all dynamic entries from the ARP cache
Displays entries in the ARP Table.
Removes an ARP entry from the ARP Table.
IP address
----------
10.7.1.102
10.7.1.135
HW address
----------
00:10:B5:04:DB:4B
00:50:22:00:2A:A4
Status
------
Dynamic
Static