Example
In this example, the MAC-layer address 66:66:66:66:66:66 is added to port g1.
Console (config)# interface ethernet g1
Console (config-if)# port security routed secure-address
66:66:66:66:66:66
show bridge address-table
The show bridge address-table privileged EXEC command displays all entries in the bridge-
forwarding database.
Syntax
show bridge address-table [vlan vlan] [ethernet interface | port-channel port-channel-
number]
•
vlan—Specific valid VLAN, such as VLAN 1.
•
interface—A valid Ethernet port.
•
port-channel-number—A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Address Table Commands
95