Show Bridge Address-Table - Dell PowerConnect 3524 Cli Reference Manual

User Guidelines
• The command enables adding secure MAC addresses to a routed port in port security mode.
• The command is available when the port is a routed port and in port security mode. The address is
deleted if the port exits the security mode or is not a routed port.
Example
The following example adds the MAC-layer address 66:66:66:66:66:66 to port 1/e1.
Console(config)# interface ethernet 1/e1
Console(config-if)# port security routed secure-address
66:66:66:66:66:66

show bridge address-table

The show bridge address-table Privileged EXEC mode command displays all entries in the bridge-
forwarding database.
Syntax
• show bridge address-table [vlan vlan] [ethernet interface | port-channel port-channel-number]
• vlan — Specifies a valid VLAN, such as VLAN 1.
• interface — A valid Ethernet port.
port-channel-number — A valid port-channel number.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
• Internal usage VLANs (VLANs that are automatically allocated on ports with a defined Layer 3 interface)
are presented in the VLAN column by a port number and not by a VLAN ID.
• Special MAC addresses that were not statically defined or dynamically learned are displayed in the
MAC Address Table. This includes, for example, MAC addresses defined in ACLs.
112
Address Table Commands