Show Bridge Address-Table - Dell PowerConnect 5424 Command Line Interface Manual

show bridge address-table

The show bridge address-table Privileged EXEC mode command displays all entries in the bridge-
forwarding database.
Syntax
• show bridge address-table [vlan vlan] [ethernet interface | port-channel port-channel-number]
vlan — Specific valid VLAN, such as VLAN 1.
•
• interface — A valid Ethernet port.
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
• Internal usage VLANs (VLANs that are automatically allocated on routed ports) would be presented in
the VLAN column by a port number and not by a VLAN ID.
Example
In this example, all classes of entries in the bridge-forwarding database are displayed.
Console# show bridge address-table
Aging time is 300 sec
vlan mac address
---- -----------
1 00:60:70:4C:73:FF
1 00:60:70:8C:73:FF
200 00:10:0D:48:37:FF
8 00:10:0D:48:37:FF
106
Address Table Commands
port type
---- ----
g8 dynamic
g7 dynamic
g4 static
g2 dynamic