Ip Dhcp Snooping Binding - Dell PowerConnect 6224 Command Line Interface Manual

Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip dhcp snooping
console(config-if-vlan1,2,3)#ip dhcp snooping

ip dhcp snooping binding

Use the ip dhcp snooping binding command to configure a static DHCP
Snooping binding. Use the "no" form of this command to remove a static
binding.
Syntax
ip dhcp snooping binding
interface
no ip dhcp snooping binding mac-address
mac-address — The client's MAC address.
•
vlan-id — The number of the VLAN the client is authorized to use.
•
ip-address — The IP address of the client.
•
interface —The interface on which the client is authorized. The form is
•
unit/port.
Default Configuration
There are no static DHCP snooping bindings by default.
Command Mode
Global Configuration mode
mac-address
vlan
DHCP Snooping Commands
vlan-id ip-address
interface
259