Show Sflow; Table 484: Show Sflow Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

show sflow

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 484: show sflow Output Fields

Field Name
sFlow
Sample rate
Sample limit
Polling interval
Agent ID
show sflow show sflow
Copyright © 2010, Juniper Networks, Inc.
show sflow
<collector>
<interface>
Command introduced in Junos OS Release 9.3 for EX Series switches.
Display default sFlow technology configuration information.
—Display default sFlow technology configuration information.
none
collector —(Optional) Display standard status information about the specified sFlow
collector.
—(Optional) Display standard status information about the specified sFlow
interface
interface.
view
show sflow interface on page 3602
show sflow collector on page 3601
Example: Configuring sFlow Technology to Monitor Network Traffic on EX Series
Switches on page 3579
Configuring sFlow Technology for Network Monitoring (CLI Procedure) on page 3584
show sflow on page 3599
Table 484 on page 3599 lists the output fields for the
are listed in the approximate order in which they appear.
Field Description
Status of the feature:
enabled
Rate at which packets are sampled.
Number of packets sampled per second. The sample limit cannot
be configured and is set to 300 packets/second.
Interval at which the sFlow agent polls the interface.
The IP address assigned to the sFlow agent.
sFlow : Enabled
Sample rate : 1:1000
Chapter 128: sFlow Monitoring Technology
show sflow
or .
disabled
command. Output fields
Level of Output
All levels
All levels
All levels
All levels
All levels
3599