Show Ike Certificates - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

show ike certificates

show ike certificates { all | crl | peer | public-certs | root-cas } [ hex-format ]
Syntax
[ filter ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Displays the IKE certificates configured on the E Series router.
Description
NOTE: This command has been replaced by the show ipsec certificates command
and may be removed completely in a future release.
Options
Privileged Exec, User Exec
Mode
694
show ike certificates
all Displays all certificates configured on the router
crl Displays certificate revocation lists
peer Displays peer certificates
public-certs Displays public certificates
root-cas Displays root CA certificates
hex-format Displays certificate data in hexadecimal format
filter See Filtering show Commands on page 4