Radius Rollover-On-Reject - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

radius rollover-on-reject

radius rollover-on-reject { enable | disable }
Syntax
no radius rollover-on-reject
Command introduced before JUNOSe Release 7.1.0.
Release Information
On a virtual router, specifies whether the router should roll over to the next RADIUS
Description
server when the router receives an access-reject message for the user it is
authenticating. The no version restores the default value, disable.
Options
Global Configuration
Mode
enable Specifies the feature
disable Disables the feature; this is the default setting
Chapter 6: R Commands
radius rollover-on-reject
341