Set Dhcp Relay Giaddr-Selects-Interface - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

Chapter 7: S Commands

set dhcp relay giaddr-selects-interface

[ no ] set dhcp relay giaddr-selects-interface
Syntax
Command introduced in JUNOSe Release 8.0.0.
Release Information
Configures DHCP relay to use information in the giaddr in the DHCP ACK packets
Description
that are generated by the server and destined for the DHCP client. The DHCP server
uses this information to determine the primary interface that is used to optionally
build dynamic subscriber interfaces.
The no version restores the default that builds dynamic subscriber interfaces on the
IP interface on which DHCP client discover packets are received.
Global Configuration
Mode
479
set dhcp relay giaddr-selects-interface