Neighbor Peer-Type - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

neighbor peer-type

neighbor peerGroupName peer-type { internal | external | confederation }
Syntax
no neighbor peerGroupName peer-type
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the type for the peer group. The no version removes the configuration.
Description
Options
Router Configuration
Mode
54
neighbor peer-type
peerGroupName Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command, unless it is overridden for a
specific peer.
internal Peers must be in the same AS; if confederations are employed, peers
must be in the same sub-AS in the same confederation
external Peers must be in a different AS
confederation Peers must be in a different sub-AS in the same confederation;
used only if confederations are employed