Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 365

Chapter 6: R Commands
l2cd-min-lp-data-rate-dn Excluded by default; includes RADIUS attribute
26-122, Min-LP-Data-Rate-Dn
l2cd-max-interlv-delay-up Excluded by default; includes RADIUS attribute
26-123, Max-Interlv-Delay-Up
l2cd-act-interlv-delay-up Excluded by default; includes RADIUS attribute
26-124, Act-Interlv-Delay-Up
l2cd-max-interlv-delay-dn Excluded by default; includes RADIUS attribute
26-125, Max-Interlv-Delay-Dn
l2cd-act-interlv-delay-dn Excluded by default; includes RADIUS attribute
26-126, Act-Interlv-Delay-Dn
l2cd-dsl-line-state Excluded by default; includes RADIUS attribute 26-127,
DSL-Line-State
l2cd-dsl-type Excluded by default; includes RADIUS attribute 26-128,
DSL-Type
mlppp-bundle-name Excluded by default; includes RADIUS attribute 26-62,
MLPPP-Bundle-Name
nas-port Includes RADIUS attribute 5, NAS-Port
nas-port-id Includes RADIUS attribute 87, NAS-Port-Id
nas-port-type Includes RADIUS attribute 61, NAS-Port-Type
pppoe-description Includes RADIUS attribute 26-24, Pppoe-Description
profile-service-description Includes RADIUS attribute 26-53,
Service-Description
tunnel-client-auth-id Includes RADIUS attribute 90, Tunnel-Client-Auth-Id
tunnel-client-endpoint Includes RADIUS attribute 66, Tunnel-Client-Endpoint
tunnel-interface-id Excluded by default; includes RADIUS attribute 26-44,
Tunnel-Interface-ID
tunnel-medium-type Includes RADIUS attribute 65, Tunnel-Medium-Type
tunnel-server-attributes Excluded by default; includes all supported tunnel
server attributes; that is, the attributes of the tunnel client when PPP is
terminated at the LNS on the router
tunnel-server-auth-id Includes RADIUS attribute 91, Tunnel-Server-Auth-Id
tunnel-server-endpoint Includes RADIUS attribute 67,
Tunnel-Server-Endpoint
tunnel-type Includes RADIUS attribute 64, Tunnel-Type
upstream-calculated-qos-rate Includes RADIUS attribute 26-142,
Upstream-Calculated-Qos-Rate
323
radius include