Neighbor Graceful-Restart - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

neighbor graceful-restart

[ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } graceful-restart
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
ipv6Address variable added in JUNOSe Release 8.0.0.
Enables the BGP graceful restart capability for the peer or peer group, which enables
Description
BGP to maintain its forwarding state during a peer restart, avoiding network-wide
route flaps and interruptions in traffic forwarding. Graceful restart is disabled by
default. The no version disables the graceful restart capability. The default version
removes the explicit configuration from the peer or peer group and reestablishes
inheritance of the feature configuration.
Options
Address Family Configuration, Router Configuration
Mode
40
neighbor graceful-restart
ipAddress IP address of BGP neighbor
ipv6Address IPv6 address of BGP neighbor
peerGroupName Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command, unless it is overridden for a
specific peer.