Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 49

Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx Models, and
ERX310 Router (continued)
Interface Type Description
fastEthernet IEEE 802.3
Fast
Ethernet
(FE)
interface
Chapter 1: Command Reference Topics
Interface Specifier
slot/port[.subinterface1[.subinterface2 ] ]
slot Number of the chassis slot in the
range 0–6 (ERX7xx models), 0–13
(ERX14xx models), and 0–2 (ERX310
router)
port Port number on the I/O module
or port 0 for the Fast Ethernet
management port on the SRP I/O
module
The meaning of the subinterface variables
depends on the configuration context. You
can configure Fast Ethernet interfaces with
or without VLANS.
VLANs:
subinterface1 Number of the
VLAN subinterface in the range
1–2147483647; no more than
4096 VLAN subinterfaces per
Fast Ethernet physical port
subinterface2 When using
PPPoE, the number of the PPPoE
subinterface in the range
1–2147483647; no more than
8000 PPPoE subinterfaces per
Fast Ethernet line module
No VLANs:
subinterface1 When using
PPPoE, the number of the PPPoE
subinterface in the range
1–2147483647; no more than
8000 PPPoE subinterfaces per
Fast Ethernet line module
subinterface2 Not used
Interface Types and Specifiers
Example
fastEthernet
3/2.6.20
7