Path Description - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

path description

For unchannelized SONET/SDH interfaces:
Syntax
[ no ] path description name
For channelized SONET/SDH interfaces:
[ no ] path pathChannel description name
Command introduced in JUNOSe Release 7.2.0.
Release Information
Assigns a text description or an alias to a path on a channelized or unchannelized
Description
SONET/SDH interface. The no version removes the description or alias.
Options
Controller Configuration
Mode
132
path description
pathChannel Number, in the range 1–2147483648, that identifies the path
name Text string or alias of up to 80 characters