Remote Host - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

remote host

remote host { hostname | default }
Syntax
no remote host { hostname | default }
Command introduced before JUNOSe Release 7.1.0.
Release Information
Defines an L2TP host profile. Accesses the L2TP Destination Profile Host Configuration
Description
mode. The no version removes an L2TP host profile.
Options
L2TP Destination Profile Configuration
Mode
hostname Name the LAC must supply in the hostname AVP of the receive
SCCRQ; can be up to 64 characters in length (no spaces)
default Allows the LAC to use any hostname in the hostname AVP
Chapter 6: R Commands
381
remote host