Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 677

configuration Displays the configuration of each controller at the specified level
and above
layerType Type of SONET/SDH layer
section Section layer of an interface
line Line layer of an interface
path SONET or SDH path
interval Number of 15-minute intervals over which the router monitors
information; a value in the range 1–96; default value is the current interval,
number 1
controllerType Type of interface or channel
tributary SONET or SDH virtual tributary
e1 E1 channel over SDH virtual tributary
ds1 T1 channel over SONET/SDH virtual tributary
ds3 T3 over channelized SONET interface
t1 T1 channel on T3 over channelized SONET interface
total Displays the MIB statistics for all intervals
delta Displays baselined statistics for all intervals
all Shows statistics for all time intervals, rather than statistics for selected time
intervals
filter See Filtering show Commands on page 4
Privileged Exec, User Exec
Mode
Chapter 7: S Commands
show controllers sonet
635