Ntp Enable - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

ntp enable

[ no ] ntp enable
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables NTP services on the router and attaches the NTP client to the current virtual
Description
router. The no version disables reception of NTP packets on the router and removes
the association between NTP and the virtual router. The default setting is disable.
Global Configuration
Mode
102
ntp enable