Show Bgp Ipv6 Flap-Statistics - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

For e series broadband service routers
Table of Contents

Advertisement

show bgp ipv6 flap-statistics

To display IPv6 BGP flap statistics for any case other than for the route-target address
Syntax
family:
show bgp ipv6 [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName ]
flap-statistics [ ipv6Prefix ] [ filter ]
To display IPv6 BGP flap statistics for the route-target address family:
show bgp ipv6 route-target signaling flap-statistics [ rtfPrefix | rtfAddress ] [ filter ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
route-target signaling keywords and rtMemNlri variable added in JUNOSe Release
8.2.0.
rtMemNlri variable replaced by two variables, rtfAddress and rtfPrefix, in JUNOSe
Release 9.1.0.
Displays IPv6 BGP flap statistics.
Description
Options
unicast Specifies the IPv6 unicast address family and routing table; the default
option
multicast Specifies the IPv6 multicast address family and routing table
vpnv6 all Specifies the VPN-IPv6 address family and all IPv6 VPN routing and
forwarding instances
vpn6 vrf vrfName Specifies the VPN-IPv6 address family and only the IPv6 VPN
routing and forwarding instance with the name vrfName
ipv6Prefix IPv6 prefix for which you want information displayed. If no prefix
is specified, the fields are displayed for all networks.
route-target signaling Specifies the route-target address family
rtfPrefix Prefix representing the route-target membership NLRI (RT-MEM-NLRI),
in the format asNumber:extendedCommunity/prefixLength (for example,
320:320:524/36) where:
asNumber AS number for origin of route target information, in the range
1–4294967295
extendedCommunity Two-part number in the format number1:number2 that
identifies an extended community of VPNs, in the format number1:number2,
where:
number1 Autonomous system (AS) number, in the range
1–4294967295, or an IP address
number2 Unique integer, in the range 1–4294967295; 32 bits if number1
is a 16-bit AS number; 16 bits if number1 is an IP address or a 32-bit AS
number
Chapter 7: S Commands
show bgp ipv6 flap-statistics
577

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 and is the answer not in the manual?

This manual is also suitable for:

Junose 11.1.x

Table of Contents