Show Ip Mac-Validate Interface - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

show ip mac-validate interface

show ip mac-validate interface interfaceType interfaceSpecifier ] [ filter ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Displays the status of MAC address validation on the physical interface that you
Description
specify.
Options
Privileged Exec
Mode
interfaceType Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
filter See Filtering show Commands on page 4
Chapter 7: S Commands
show ip mac-validate interface
805