Ntp Broadcast-Delay - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

ntp broadcast-delay

ntp broadcast-delay delayTime
Syntax
no ntp broadcast-delay
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the estimated round-trip delay between the broadcast NTP server and the router.
Description
The no version restores the round-trip delay to the default value, 3000 microseconds.
Options
Global Configuration
Mode
100
ntp broadcast-delay
delayTime Value in the range 0–999999 microseconds