Show Ipv6 Neighbors - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

show ipv6 neighbors

show ipv6 neighbors [ vrf vrfName ] [ ipv6Address ] [ interfaceType interfaceSpecifier
Syntax
]
[ static | dynamic | summary ] [ filter ]
show ipv6 neighbors summary [ vrf vrfName ] [ filter ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
vrf keyword and vrfName variable added in JUNOSe Release 7.2.0.
Displays IPv6 neighbor discovery cache information for both static and dynamic
Description
entries.
Options
Privileged Exec, User Exec
Mode
vrfName Name of the VRF
interfaceType Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
static Displays information for only static entries
dynamic Displays information for only dynamic entries
summary Displays summary information
ipv6Address Specific IPv6 address
filter See Filtering show Commands on page 4
Chapter 7: S Commands
917
show ipv6 neighbors