Shaping-Rate - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

shaping-rate

shaping-rate shapingRate [ operator operandValue ]* [ bps | kbps ]
Syntax
[ burst burstSize [ milliseconds | bytes ] ]
shaping-rate operandValue [ operator operandValue ]* [ bps | kbps ]
no shaping-rate
Command introduced before JUNOSe Release 7.1.0.
Release Information
milliseconds and bytes keywords added in JUNOSe Release 7.1.0.
bps and kbps keywords added in JUNOSe Release 8.0.0.
Sets the shaping rate and burst size. The no version deletes the shaping rate.
Description
Options
NOTE: The lower and higher limits for the shaping rate range apply to both the bps
and kbps keywords available with this command. For example, if you want to set
the shaping rate to 1 mbps, you can either enter 1000 as the value for the shapingRate
argument and suffix it with the kbps keyword, or enter 1000000 as the value for the
shapingRate argument and suffix it with the bps keyword. Both the methods of
configurations result in the same shaping rate value to be set.
Scheduler Profile Configuration
Mode
Related Topics
510
shaping-rate
shapingRate Constant shaping rate in bits per second or kilobits per second; in
the range 1–1000000000 bps/kbps. You can set the shaping rate to vary from
1 bps to 1000 gbps (which is denoted by entering 1000000000 kbps in the CLI
for this command).
operator Mathematical function
operandValue Input for the operator; can be a QoS parameter definition name
or an integer
* Indicates that one or more parameters can be repeated multiple times in a
list in the command line
bps Specifies shaping rate in bits per second
kbps Specifies shaping rate in kilobits per second
burstSize Number, in the range 0–522240 (0–510 KB); 0 enables the router to
select an applicable default value
milliseconds Specifies burst size in milliseconds
bytes Specifies burst size in bytes
Configuring Rate Shaping for a Scheduler Node or Queue