Neighbor Ibgp-Singlehop - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

neighbor ibgp-singlehop

[ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } ibgp-singlehop
Syntax
Command introduced in JUNOSe Release 8.0.0.
Release Information
Configures an internal BGP peer to be a single-hop (non-multihop) peer. The no
Description
version restores the default, wherein internal peer cannot be a single hop. The default
version removes the explicit configuration from the peer or peer group and
reestablishes inheritance of the feature configuration.
Options
Address Family Configuration, Router Configuration
Mode
ipAddress IP address of BGP neighbor
ipv6Address IPv6 address of BGP neighbor
peerGroupName Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command, unless it is overridden for a
specific peer.
Chapter 2: N Commands
neighbor ibgp-singlehop
43