Show Ip Mroute - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

show ip mroute

show ip mroute [ groupIpAddress [ sourceIpAddress ] ]
Syntax
[ summary | count | statistics ] [ active [ bandwidth ] ] [ filter ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
active keyword added in JUNOSe Release 8.1.0.
Displays information about all or specified multicast routes.
Description
Options
Privileged Exec, User Exec
Mode
groupIpAddress IP address of a multicast group
sourceIpAddress IP address of a multicast source
summary Displays brief information about the multicast routes
count Displays the number of groups and sources
statistics Displays statistics for packets received through multicast routes that
the router has added to the multicast routing table and established on the
appropriate line modules
active Displays active mroutes
bandwidth Admission bandwidth for active multicast routes that is greater than
the specified bandwidth threshold; default is 4000 bps
filter See Filtering show Commands on page 4
Chapter 7: S Commands
815
show ip mroute