Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 769

rtfPrefix Prefix representing the route-target membership NLRI (RT-MEM-NLRI),
in the format asNumber:extendedCommunity/prefixLength (for example,
320:320:524/36) where:
asNumber AS number for origin of route target information, in the range
1–4294967295
extendedCommunity Two-part number in the format number1:number2 that
identifies an extended community of VPNs, in the format number1 : number2,
where:
prefixLength Number that specifies the length of the route prefix, in the
range 32–96
rtfAddress rtfPrefix with a prefix length of 96; representing the route-target
membership NLRI (RT-MEM-NLRI), in the format asNumber : extendedCommunity
(for example, 320:320:524 or 320:50.2.3.4:524)
l2vpn all Specifies all VPLS and VPWS instances in the L2VPN address family
l2vpn vpls vplsName Specifies the VPLS instance with the name vplsName
l2vpn vpws vpwsName Specifies the VPWS instance with the name vpwsName
siteId Numerical identifier for the site; must be an unsigned 16-bit integer
greater than zero that is unique across the VPLS domain
blockOffset Integer in the range 1–65535 that identifies a block offset for which
information is displayed
filter See Filtering show Commands on page 4
Privileged Exec, User Exec
Mode
See Monitoring BGP-Related Settings for L2VPNs in JUNOSe BGP and MPLS
Related Topics
Configuration Guide
number1 Autonomous system (AS) number, in the range
1–4294967295, or an IP address
number2 Unique integer, in the range 1–4294967295; 32 bits if number1
is a 16-bit AS number; 16 bits if number1 is an IP address or a 32-bit AS
number
Chapter 7: S Commands
show ip bgp flap-statistics
727