Pre-Share-Masked - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

pre-share-masked

pre-share-masked key
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies an encrypted (black) preshared key. The router uses this key to authenticate
Description
IKE negotiations that arrive from any remote IP address specified for this transport
profile and that are destined for any local IP address specified for this transport
profile. There is no no version. To remove a key, use the no pre-share command.
NOTE: To have preshared key authentication take place, you must also specify the
IKE policy rule as preshared by issuing the authentication command with the
pre-share keyword in ISAKMP Policy Configuration mode.
Options
Local IPSec Transport Profile Configuration
Mode
key Encrypted key value; to obtain this value, enter the unencrypted key using
the pre-share command and then display the encrypted version of the key using
the show configuration command
Chapter 4: P Commands
263
pre-share-masked