Table of Contents
Advertisement
JUNOSe 11.1.x Command Reference Guide N to Z
nsf t1
[ no ] nsf t1 { interval [ seconds ] | retry-times [ number ] }
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies either the interval, in seconds, between IS-IS restart requests sent by a
Description
restarting router on a particular interface to neighboring IS-IS routers in the network,
or the number of times the restarting router resends unacknowledged restart requests
on this interface at the specified interval. The no version restores the default time
interval, 5 seconds, or the default number of retry attempts, 1.
Options
Router Configuration
Mode
94
nsf t1
seconds Time interval in the range 5–120 seconds between transmission of
IS-IS restart requests; default value is 5 seconds
number Number of times in the range 1–3 that the router tries to resend
unacknowledged restart requests; default value is 1
Advertisement
Table of Contents
