Table of Contents
Advertisement
JUNOSe 11.1.x Command Reference Guide N to Z
radius trap no-auth-server-responding
radius trap no-auth-server-responding { enable | disable }
Syntax
no radius trap no-auth-server-responding
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables or disables SNMP traps when all the configured RADIUS authentication
Description
servers per VR fail to respond to a RADIUS Access-Request message. The no version
restores the default, disable.
Options
Global Configuration
Mode
348
radius trap no-auth-server-responding
enable Specifies the feature
disable Disables the feature; this is the default setting
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 and is the answer not in the manual?