Show Bgp Ipv6 Network - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

show bgp ipv6 network

To display information about a prefix configured for all address families or for a
Syntax
specific address family other than the route-target address family:
show bgp ipv6 [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName ]
network [ ipv6Prefix ] [ filter ]
To display information about about a prefix configured for the route-target address
family:
show bgp ipv6 route-target signaling network [ rtfPrefix ] [ filter ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
route-target signaling keywords and rtMemNlri variable added in JUNOSe
Release 9.0.0.
rtMemNlri variable replaced by rtfPrefix variable in JUNOSe Release 9.1.0.
Displays information about a potentially originated prefix that was configured with
Description
the network command.
Options
unicast Specifies the IPv6 unicast address family and routing table; the default
option
multicast Specifies the IPv6 multicast address family and routing table
vpnv6 all Specifies the VPN-IPv6 address family and all IPv6 VPN routing and
forwarding instances
vpn6 vrf vrfName Specifies the VPN-IPv6 address family and only the IPv6 VPN
routing and forwarding instance with the name vrfName
ipv6Prefix Prefix that defines the IPv6 network that you want to filter
route-target signaling Displays information for only the route-target address
family
rtfPrefix Prefix representing the route-target membership NLRI (RT-MEM-NLRI),
in the format asNumber:extendedCommunity/prefixLength (for example,
320:320:524/36) where:
asNumber AS number for origin of route target information, in the range
1–4294967295
extendedCommunity Two-part number in the format number1:number2 that
identifies an extended community of VPNs, in the format number1:number2,
where:
number1 Autonomous system (AS) number, in the range
1–4294967295, or an IP address
number2 Unique integer, in the range 1–4294967295; 32 bits if number1
is a 16-bit AS number; 16 bits if number1 is an IP address or a 32-bit AS
number
Chapter 7: S Commands
show bgp ipv6 network
589