Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 606

JUNOSe 11.1.x Command Reference Guide N to Z
Privileged Exec, User Exec
Mode
564
show bgp ipv6
next-hop IP address of the next router that is used when forwarding a
packet to the destination network
next-hop-cost Whether the indirect next hop of the route is unreachable,
if not, displays IGP cost to the indirect next hop
origin Origin of the route
originator-id Router ID of the router in the local AS that originated the route
out-label MPLS label for the route; the label sent with outgoing MPLS frames;
also the label received from MP-BGP peer; typically, but not always, this is
the label received from MP-BGP peers
peer IP address of BGP peer from which route was learned
peer-type Type of BGP peer: internal, external, or confederation
rd Route distinguisher
safi Subsequent address family identifier
stale Route that has gone stale due to peer restart
unknown-types Attribute codes for unknown path attributes
weight Weight of the route
* Indicates that one or more parameters can be repeated multiple times
in a list in the command line
filter See Filtering show Commands on page 4