Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 58

JUNOSe 11.1.x Command Reference Guide N to Z
Table 4: Interface Types and Specifiers for E120 Router and E320 Router (continued)
16
Interface Types and Specifiers
Interface Type Description
lag IEEE
802.3ad link
aggregation
group (LAG)
interface
mplsL2shim MPLS shim
interface
mplsMajor MPLS major
interface
mplsMinor MPLS minor
interface
Interface Specifier
bundle-name[.subinterface ]
bundle-name Name of the bundle
subinterface Number of the LAG
subinterface in the range 1–2147483647
slot/adapter/port[.subinterface ]
slot Number of the chassis slot in the
range 0–5 (E120 router) and 0–5 or
11–16 (E320 router)
adapter Identifier for the IOA within the
chassis slot, either 0 or 1, where:
0 indicates that the IOA is installed
in the right IOA bay (E120 router)
or the upper IOA bay (E320 router).
1 indicates that the IOA is installed
in the left IOA bay (E120 router) or
the lower IOA bay (E320 router).
port Port number on the IOA
subinterface Number of the subinterface
in the range 1–2147483647
slot/adapter/port[.subinterface ]
slot Number of the chassis slot in the
range 0–5 (E120 router) and 0–5 or
11–16 (E320 router)
adapter Identifier for the IOA within the
chassis slot, either 0 or 1, where:
0 indicates that the IOA is installed
in the right IOA bay (E120 router)
or the upper IOA bay (E320 router).
1 indicates that the IOA is installed
in the left IOA bay (E120 router) or
the lower IOA bay (E320 router).
port Port number on the IOA
subinterface Number of the subinterface
in the range 1–2147483647
[ vr:]tunnel-name
vr Name of a virtual router
tunnel-name—Name of the tunnel
Example
lag paris.2
mplsL2shim
3/0/2.1
mplsMajor 3/0/2.1
mplsMinor
lsp-02020202-1-4