Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 364

For e series broadband service routers
Table of Contents

Advertisement

JUNOSe 11.1.x Command Reference Guide N to Z
322
radius include
framed-interface-id Excluded by default; includes RADIUS attribute 96,
Framed-Interface-Id, if an IPv6 interface ID is assigned to the subscriber
framed-ip-addr Includes RADIUS attribute 8, Framed-IP-Address, if an IP
address is assigned to the subscriber
framed-ipv6-prefix Excluded by default; includes RADIUS attribute 97,
Framed-Ipv6-Prefix, if at least one IPv6 prefix is assigned to the subscriber
icr-partition-id Excluded by default; includes RADIUS attribute 26-150,
ICR-Partition-Id, which is a user-configured value of up to 128 characters
interface-description Includes RADIUS attribute 26-63, Interface-Desc
l2c-downstream-data Includes RADIUS attribute 26-92,
L2C-Down-Stream-Data
l2c-upstream-data Includes RADIUS attribute 26-93, L2C-Up-Stream-Data
l2c-upstream-data Includes RADIUS attribute 26-93, L2C-Up-Stream-Data
l2cd-acc-loop-cir-id Excluded by default; includes RADIUS attribute 26-110,
Acc-Loop-Cir-Id
l2cd-acc-aggr-cir-id-bib Excluded by default; includes RADIUS attribute
26-111, Acc-Aggr-Cir-Id-Bin
l2cd-acc-aggr-cir-id-asc Excluded by default; includes RADIUS attribute
26-112, Acc-Aggr-Cir-Id-Asc
l2cd-act-data-rate-up Excluded by default; includes RADIUS attribute 26-113,
Act-Data-Rate-Up
l2cd-act-data-rate-dn Excluded by default; includes RADIUS attribute 26-114,
Act-Data-Rate-Dn
l2cd-min-data-rate-up Excluded by default; includes RADIUS attribute
26-115, Min-Data-Rate-Up
l2cd-min-data-rate-dn Excluded by default; includes RADIUS attribute
26-116, Min-Data-Rate-Dn
l2cd-att-data-rate-up Excluded by default; includes RADIUS attribute 26-117,
Att-Data-Rate-Up
l2cd-att-data-rate-dn Excluded by default; includes RADIUS attribute 26-118,
Att-Data-Rate-Dn
l2cd-max-data-rate-up Excluded by default; includes RADIUS attribute
26-119, Max-Data-Rate-Up
l2cd-max-data-rate-dn Excluded by default; includes RADIUS attribute
26-120, Max-Data-Rate-Dn
l2cd-min-lp-data-rate-up Excluded by default; includes RADIUS attribute
26-121, Min-LP-Data-Rate-Up

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.1.x

Table of Contents