Show Ethernet Oam Lfm Status - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

show ethernet oam lfm status

show ethernet oam lfm status interfaceType interfaceSpecifier
Syntax
Command introduced in JUNOSe Release 11.1.0.
Release Information
Displays the current Ethernet OAM link-fault management configuration for a
Description
particular interface. OAM must be operational on the interface when you run this
command.
Options
Privileged Exec, User Exec
Mode
Related Topics
interfaceType One of the following interface types listed in "Interface Types
and Specifiers" on page 5:
fastEthernet
gigabitEthernet
tenGigabitEthernet
interfaceSpecifier Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
Monitoring OAM Link-Fault Management Configuration for an Interface
Chapter 7: S Commands
show ethernet oam lfm status
669