Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 366

JUNOSe 11.1.x Command Reference Guide N to Z
324
radius include
Attributes available for Access-Request messages only:
access-loop-parameters Includes RADIUS attribute 26-81, L2c-Information
Attributes available for Acct-Start and Acct-Stop messages only:
acct-link-count Includes RADIUS attribute 51, Acct-Link-Count
class Includes RADIUS attribute 25, Class
egress-policy-name Includes RADIUS attribute 26-11, Egress-Policy-Name
framed-compression Includes RADIUS attribute 13, Framed-Compression
framed-ip-netmask Includes RADIUS attribute 9, Framed-IP-Netmask
ingress-policy-name Includes RADIUS attribute 26-10, Ingress-Policy-Name
tunnel-assignment-id Includes RADIUS attribute 82, Tunnel-Assignment-Id
tunnel-preference Includes RADIUS attribute 83, Tunnel-Preference
Attributes available for Acct-Stop messages only:
delegated-ipv6-prefix Excluded by default; includes RADIUS attribute 123,
Delegated-Ipv6-Prefix
framed-ipv6-pool Excluded by default; includes RADIUS attribute 100,
Framed-IPv6-Pool
framed-ipv6-route Excluded by default; includes RADIUS attribute 99,
Framed-IPv6-Route
input-gigapkts Includes RADIUS attribute 26-35, Acct-Input-Gigapackets
input-gigawords Includes RADIUS attribute 52, Acct-Input-Gigawords
ipv6-accounting Excluded by default; includes the following RADIUS
attributes:
IPv6-Acct-Input-Octets [26-151]
IPv6-Acct-Output-Octets [26-152]
IPv6-Acct-Input-Packets [26-153]
IPv6-Acct-Output-Packets [26-154]
IPv6-Acct-Input-Gigawords [26-155]
IPv6-Acct-Output-Gigawords [26-156]
ipv6-local-interface Excluded by default; includes RADIUS attribute 26-46,
Ipv6-Local-Interface
ipv6-nd-ra-prefix Excluded by default; includes RADIUS attribute 26-129,
Ipv6-NdRa-Prefix
ipv6-primary-dns Excluded by default; includes RADIUS attribute 26-47,
Ipv6-Primary-DNS