Table 33: Shaping Rate And Shaping Mode - Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010 Configuration Manual

JUNOSe 11.1.x Quality of Service Configuration Guide

Table 33: Shaping Rate and Shaping Mode

The QoS administrator configures the traffic classes for voice and video services.
Configuring Traffic
Classes
1.
2.
The QoS administrator configures a parameter definition for the QoS downstream
Configuring the QoS
rate application. Using subscriber-interface types, the QoS administrator then enables
Parameter Definition for
ANCP to create parameter instances of the QoS downstream rate application.
QoS Downstream Rate
1.
2.
3.
The QoS administrator then configures the QoS shaping mode using the QoS cell
Configuring the QoS
mode application. Using subscriber-interface types, the QoS administrator then
Parameter Definition for
enables ANCP to create parameter instances using the QoS cell mode application.
QoS Cell Mode
1.
2.
306
Example: QoS Parameter Configuration for QoS Downstream Rate
VLAN1
Cell
Shaping mode
10000000 bps
Shaping rate
Configure the traffic class named voice.
host1(config)#traffic-class voice
host1(config-traffic-class)#exit
Configure the traffic class named video.
host1(config)#traffic-class video
host1(config-traffic-class)#exit
Configure a parameter definition named ancpVlan.
host1(config)#qos-parameter-define ancpVlan application qos-downstream-rate
Define the controlled-interface types for vlan and ip to adjust the shaping rate
for the VLAN and IP queues.
a. Configure the controlled-interface type for VLAN.
b. Configure the controlled-interface type for IP.
host1(config-qos-parameter-define)#controlled-interface-type vlan
host1(config-qos-parameter-define)#controlled-interface-type ip
Define the subscriber-interface types for vlan and ethernet.
host1(config-qos-parameter-define)#subscriber-interface-type vlan
host1(config-qos-parameter-define)#subscriber-interface-type ethernet
host1(config-qos-parameter-define)#exit
Configure a parameter definition named cellmodeVlan.
host1(config)#qos-parameter-define cellmodeVlan application qos-cell-mode
Define the controlled-interface types for vlan and ip for the shaping mode.
host1(config-qos-parameter-define)#controlled-interface-type vlan
VLAN2
Cell
100000 bps