Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1024

JUNOSe 11.1.x Command Reference Guide N to Z
Privileged Exec, User Exec
Mode
982
show ldp binding
generic Displays only generic labels
atm Displays only ATM VPI/VCI labels
local Displays only local labels
remote Displays only remote labels
atm Displays the specified ATM VPI/VCI labels
vpi Specifies ATM VPI that partially designates a label
vci Specifies ATM VCI that partially designates a label
explicit-null-label Displays binding information for the explicit null label
implicit-null-label Displays binding information for the implicit null label
labelNumber Label for which binding information is displayed; number in the
range 16–1048575
labelRangeEnd Label designating the high end of a range of labels for which
binding information is specified; number in the range 16–1048575
brief Displays limited information
filter See Filtering show Commands on page 4
layer2-vc Displays binding information for layer 2 over MPLS
vcType One of the following types of virtual circuit over MPLS for which binding
information is displayed: aal5-vcc, ethernet, frame-relay, vlan
vcId Virtual circuit identifier, number in the range 1–4294967295