Shaping-Rate - Juniper JUNOS OS 10.3 - SOFTWARE Manual

shaping-rate

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
shaping-rate (percent percentage | rate);
[edit class-of-service schedulers scheduler-name]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Configure shaping rate to throttle the rate at which queues transmit packets.
We recommend that you configure the shaping rate as an absolute maximum usage and
not as additional usage beyond the configured transmit rate.
If you do not include this statement, the default shaping rate is 100 percent, which is the
same as no shaping at all.
—Shaping rate as a percentage of the available interface bandwidth.
percentpercentage
Range: 0 through 100 percent
—Peak rate, in bits per second (bps). You can specify a value in bits per second either
rate
as a complete decimal number or as a decimal number followed by the abbreviation
k (1000), m (1,000,000), or g (1,000,000,000).
Range: 3200 through 32,000,000,000 bps
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring CoS on EX Series Switches on page 3173
Understanding Junos OS CoS Components for EX Series Switches on page 3148
Chapter 112: Configuration Statements for CoS
3267