Show Mpls Tunnels - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

show mpls tunnels

show mpls [ traffic-eng ] tunnels [ name tunnelName ]
Syntax
[ role { all | head | tail | middle | remote } | up | down ]
[ source-id sourceAddress [ srcId ] ] [ destination destAddr ]
[ interface interfaceType interfaceSpecifier ] [ brief | count-only ] [ filter ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Displays status and configuration for all tunnels or for a specific tunnel in the current
Description
router context.
Options
traffic-eng Specifies optional keyword for compatibility with non–E Series
implementations
tunnelName Name of tunnel or minor interface to be displayed
role Displays tunnels in which the router has a specified role:
all Displays all tunnels of which the router is a part
head Displays tunnels where the router is the ingress router, or tunnel
headend
tail Displays tunnels where router is the egress router, or tunnel tailend
(endpoint or destination of the tunnel)
middle Displays tunnels where router is a transit router on the tunnel
remote Displays tunnels where router is a transit router or egress router
(tailend)
up Displays tunnels that are up
down Displays tunnels that are down
sourceAddress Source address of tunnels to be displayed
srcId Local ID associated with source address of tunnels to be displayed, an
integer in the range 0–65535
destAddress Destination address of tunnels to be displayed
interface Displays information for the specified interface
interfaceType Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier Particular interface; format varies according to interface
type; see Interface Types and Specifiers on page 5
brief Displays only brief or summary information about the tunnels
count-only Displays a count for entries that match the specified conditions
filter See Filtering show Commands on page 4
Chapter 7: S Commands
1021
show mpls tunnels